HSN-100®

HSN-100 Chlorinated Polyolefin Elastomer®

Cross-linked heat shrink tubing which operates in a broad temperature range and remains a very flexible tubing at low temperatures in rugged outdoor conditions.

Standard Color: Black


Features

  • 2:1 shrink ratio
  • Outstanding abrasion and cut-through resistance
  • Operates in a broad temperature range
  • Flexible at low temperatures
  • Resistant to most fluids, oils and solvents
  • Easily marked
  • Meets Military specifications

Uses

  • Rugged applications requiring tough, flexible, highly abrasion-resistant coverings
  • Applications in severe outdoor environmental conditions
  • Insulation, strain relief and protection of military and aerospace cable harnesses and wire bundles
  • Applications requiring low and high temperature performance
  • Applications requiring resistance to aviation and vehicle fuels, lubricating oils, acids, solvents and hydraulic fluids
  • Marine applications

Specifications

  • SAE-AMS-DTL-23053/1 Class 1 and Class 2
  • AMS 3623
  • MIL-R-46846, Type 1, Class 1
  • SC-X-15112

Technical Data

Shrink Ratio 2:1
Minimum Recommended Shrink Temperature 135°C (275°F)
Operating Temperature Range -70°C to 121°C
Longitudinal Shrinkage +1/-10%

Physical / Electrical / Chemical Properties

Specific Gravity 1.3
Tensile Strength 2100 psi
Ultimate Elongation 500%
Low Temperature Flexibility 4 [email protected] -70°C No cracking
Flammability Self-extinguishing
Volume Resistivity 1012 ohm-cm
Dielectric Strength 800 vpm
Corrosion Resistance Non corrosive
Fuel, Oil, Solvent, Acids, and Alkalis Resistance Excellent
Expanded I.D.
Minimum
Recovered I.D.
Maximum
Recovered Wall
Nominal
Standard Packaging
(per box)
Product on Spools
Size in. mm in. mm in. mm ft.
/ Spool
Total
ft. / Box
1/8 .125 3.18 .072 1.83 .030 0.76 200′ 600′
3/16 .187 4.75 .106 2.69 .035 0.89 200′ 600′
1/4 .250 6.35 .125 3.18 .035 0.89 200′ 600′
3/8 .375 9.53 .187 4.75 .040 1.02 100′ 300′
1/2 .500 12.70 .250 6.35 .048 1.22 100′ 300′
5/8 .625 15.88 .312 7.92 .052 1.32 100′ 300′
3/4 .750 19.05 .375 9.53 .057 1.45 100′ 300′
7/8 .875 22.23 .437 11.10 .065 1.65 100′ 300′
1 1.000 25.40 .500 12.70 .070 1.78 100′ 300′
11/4 1.250 31.75 .625 15.54 .087 2.21 50′ 100′
11/2 1.500 38.10 .750 19.05 .095 2.41 50′ 100′

All information presented is believed to be reliable and is offered only as a guide to product selection. As each application is unique, Insultab can make no warranties as to the suitability of any products for a particular use. Specifications are subject to change.

Go to Top