SPECIALTY MATERIALS HEAT SHRINKABLE TUBING
HSN-100 NEOPRENE®
FEATURES
- 2:1 shrink ratio
- Outstanding abrasion and cut-through resistance
- Operates in a broad temperature range
- Flexible at low temperatures
- Resistant to most fluids, oils and solvents
- Easily marked
- Meets Military specifications
USES
- Rugged applications requiring tough, flexible, highly abrasion-resistant coverings
- Applications in severe outdoor environmental conditions
- Insulation, strain relief and protection of military and aerospace cable harnesses and wire bundles
- Applications requiring low and high temperature performance
- Applications requiring resistance to aviation and vehicle fuels, lubricating oils, acids, solvents and hydraulic fluids
- Marine applications
SPECIFICATIONS
- SAE-AMS-DTL-23053/1 Class 1 and Class 2
- AMS 3623
- MIL-R-46846, Type 1, Class 1
- SC-X-15112
TECHNICAL DATA
- Shrink Ratio: 2:1
- Minimum Recommended Shrink Temperature: 135°C (275°F)
- Operating Temperature Range: -70°C to 121°C
- Longitudinal Shrinkage: +1/-10%
- Physical / Electrical / Chemical Properties:
- Specific Gravity: 1.3
- Tensile Strength: 2100 psi
- Ultimate Elongation: 500%
- Low Temperature Flexibility: 4 hrs.@ -70°C No cracking
- Flammability: Self-extinguishing
- Volume Resistivity: 1012 ohm-cm
- Dielectric Strength: 800 vpm
- Corrosion Resistance: Non corrosive
- Fuel, Oil, Solvent, Acids, and Alkalis Resistance: Excellent
| |
Expanded I.D.
Minimum |
Recovered I.D.
Maximum |
Recovered Wall
Nominal |
Standard Packaging
(per box) |
| Product on Spools |
| Size |
in. |
mm |
in. |
mm |
in. |
mm |
ft.
/ Spool |
Total
ft. / Box |
|
1 |
/ |
8 |
.125 |
3.18 |
.072 |
1.83 |
.030 |
0.76 |
200' |
600' |
|
3 |
/ |
16 |
.187 |
4.75 |
.106 |
2.69 |
.035 |
0.89 |
200' |
600' |
|
1 |
/ |
4 |
.250 |
6.35 |
.125 |
3.18 |
.035 |
0.89 |
200' |
600' |
|
3 |
/ |
8 |
.375 |
9.53 |
.187 |
4.75 |
.040 |
1.02 |
100' |
300' |
|
1 |
/ |
2 |
.500 |
12.70 |
.250 |
6.35 |
.048 |
1.22 |
100' |
300' |
|
5 |
/ |
8 |
.625 |
15.88 |
.312 |
7.92 |
.052 |
1.32 |
100' |
300' |
|
3 |
/ |
4 |
.750 |
19.05 |
.375 |
9.53 |
.057 |
1.45 |
100' |
300' |
|
7 |
/ |
8 |
.875 |
22.23 |
.437 |
11.10 |
.065 |
1.65 |
100' |
300' |
| |
|
|
1 |
1.000 |
25.40 |
.500 |
12.70 |
.070 |
1.78 |
100' |
300' |
| 1 |
1 |
/ |
4 |
1.250 |
31.75 |
.625 |
15.54 |
.087 |
2.21 |
50' |
100' |
| 1 |
1 |
/ |
2 |
1.500 |
38.10 |
.750 |
19.05 |
.095 |
2.41 |
50' |
100' |
Standard Color: Black
All information presented is believed to be reliable and is offered only as a guide to product selection. As each application is unique, Insultab can make no warranties as to the suitability of any products for a particular use. Specifications are subject to change.
